Which SnapPads for 9" Diameter Feet on Landing Gear

Question

Question:

Snap Pads for a 2020 Grand Design 375 RES 5th Wheel? Would you know if what this unit requires is the 9 Snap Pad Extra?

asked by: John K

0

Expert Reply:

We don't have any way of knowing what size the landing gear feet on your 2020 Grand Design 375 RES, but you can measure the feet to determine what size snap pads you need. If you have 9" diameter feet the # SP54FR6 will work well for you. If you find that you've got different sized feet on your landing gear just let me know and I can help you locate the correct snap pads

expert reply by: Erik B

0

Answer 1

SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you won't have to keep replacing them every time you need to take them off.

view full answer...

Answer 2

There are a few things to consider when purchasing new tires and wheels for your camper. A wider tire such as the Westlake ST225 #LHAW124 can certainly provide more traction on the road than the factory size tires on your camper, however this might…

view full answer...

Answer 3

It does not; there isn't a way to use the Furrion camera system and integrate it into the monitor of your 2020 Chevy Silverado 3500. So you will need to utilize the screen that comes with the Vision S system, and for that you have the option…

view full answer...

Answer 4

I have a different solution for you, but I contacted the manufacturer and there is currently no handrail available for the XF series of steps. You could use the Lend-a-Hand Extra Large Folding Grab Handle for RVs #AM-533. This has a more universal…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Which SnapPads for 9" Diameter Feet on Landing Gear

Product Page this Question was Asked From

Continue Researching