5-Pin RVS to RCA Adapter Availability

Question

Question:

I need a 5 pin, 4 wire fitting to rca adapter. the setup is coaxial cable with a transmitter at one end. the other end is connected to a metal box with a red and black power wire on side. the oposite side has 4 wires connected to a 5 pin female rvs fitting. one opening is power coming out the fitting. the camera in the rear has mike holes. part numbers rvs-rca5-am or rca5-am look like what i need to hook up monitor. is this right?

asked by: Devale J

0

Expert Reply:

It does sound like you need the Rear View Safety Adapter cord part # RVS-RCA5-AM. This has the 5 pin RVS style connector on one end and RCA cables on the other. The red RCA is a little different though so check out the picture I attached to verify.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I have attached an image of the 5-Pin connector pinout with the RCA being yellow for video, and white for audio on the Rear View Safety Adapter Cord #RVS-RCA5-AM.

view full answer...

Answer 2

I apologize for any confusion but the Rear View Safety Adapter Cord - 5 Pin Female to RCA Female #RVS-RCA5 has a 5 pin female connection like what you see in the attached picture. The opposite connector to this is 5 pin male to RCA male part…

view full answer...

Answer 3

Yes, we do have camera systems that you can use with the Uconnect system in what I can only assume is a Ram truck. For this, the only confirmed option we have is a truck bed camera like the Truck Bed Cargo Camera for Factory Monitor part #3460015…

view full answer...

Answer 4

The Rear View Safety Adapter Cord #RVS-RCA5-AM does not work in conjunction with the Trailer Tow Quick Connect Kit #RVS-213-613 you referenced. Instead, it connects a Rear View Safety camera directly to any monitor with an RCA input. To power it,…

view full answer...

Answer 5

The red cable of the Rear View Safety Adapter Cord #RVS-RCA5 provides right channel sound, the white provides left channel sound, and the yellow provides video.

view full answer...

Answer 6

Rear View Safety Third Brake Light with Camera #RVS-915 is designed specifically for Jason truck caps (camper shells, toppers) and is not a confirmed fit for a 2000 Ford Excursion. There isn't a custom fit option for your Excursion but we do have…

view full answer...

Answer 7

I have the perfect solution for you! To add a multiplexer to your Rear View Safety #RVS-619N-S system you can use the Rear View Safety Multiplexer Box #RVS-501N , which is the part that is normally included in the upgraded #RVS-770619N-S system.…

view full answer...

Answer 8

The Rear View Safety Switcher part #RVS-501N is for connecting to any standard cameras that use RCA connections whereas the part #RVS-501N-3 is for connecting to RVS brand cameras.

view full answer...

Answer 9

The camera #RVS-770-HD can be converted to an RCA cable connection with the Rear View Safety Adapter Cord #RVS-RCA5-AM but as-is it would not connect directly to RCA cables.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

5-Pin RVS to RCA Adapter Availability

Product Page this Question was Asked From

Continue Researching