How to Determine if Leaf Springs Will Work on 7,000 lb Trailer Axle
Question:
Looking for replacement leaf Springs for my 2013 Redwood 36RL. 7000 Lb axles. Looking for for a HD spring pack that will replace the originals. Do you have any suggestions.
asked by: Randel P
Expert Reply:
We may have an option for you but don't have any way to know the current suspension or leaf springs you have on your current trailer axles. The two leaf springs we carry for a 7,000 lb axle are:
- Double-Eye Suspension: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long # e64SR
- Slipper Spring Suspension: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long # e74SR
In order to determine if these will fit you will need to measure the length from the center of the spring eye to the end of the spring; you will also need to know the width of your spring and the weight rating of your axle. I have added links to help articles on slipper and double-eye suspension which I highly recommend checking out.
Products Referenced in This Question
6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 7000 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 24-7/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Q&A: 26 Inch Long Leaf Springs For Keystone Cougar With 5,200 lb Axles
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Search Results: trailer springs
- Q&A: Can 26 Inch 3,500 lb Leaf Springs be Replaced With 4,000 lb Leaf Springs
- Q&A: Recommended MoRryde Equalizer and Replacement Shackles for a 2023 CrossRoads Sunset Trailer
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Deka Wire - Jacketed 7-Wire - 14 Gauge - per Foot
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Equalizer Bolt with Cotter Pin and Castle Nut - 7/8" Diameter
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Search Results: trailer wire kit
- Search Results: spring hardware
- Search Results: equalizer 6000
- Search Results: 7 wire
- Search Results: 7 wire trailer wiring kit
- Search Results: springs
- Video: Lippert Equa-Flex Cushioned Equalizers Review and Installation
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Video: Lippert Road Armor Shock Absorbing Equalizer Kit Installation - 2022 Grand Design Imagine Travel Tra
- Video: Review of Lippert Components Trailer Leaf Spring Suspension - Equalizers - LC281314
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation
- Q&A: Parts Needed to Make Over Under Axle Kit for Trailer with 7k Axles
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Article: Slipper Spring Trailer Suspension System Review
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Seals - BB60011 Review
- Q&A: Making Sense of Trailer Leaf Spring Capacities
- Q&A: Switching Trailer from Torsion Axles to 3,500 lb Leaf Spring Axles
- Article: Double-Eye Trailer Suspension System Review