Brackets and Bunks For my Magi BT 28
Question:
I have a Magi BT 28 foot long. I wast to replace the roller with heavy duty bunks for a 26 foot V Hull. What do you recommend I purchase brackets and bunks? MEASUREMENTS Dimensions Nominal Length 26.6 ft Max Bridge Clearance 7ft Beam 8.42ft Weights Dry Weight 5,220Lb Miscellaneous Deadrise At Transom 16deg Tanks Fresh Water Tank Capacity 27gal Fuel Tank Capacity 70gal Holding Tank Capacity 13gal
asked by: Jorge A
Expert Reply:
We do offer a carpeted bunks like the CE Smith Carpeted Bunk Boards for Boat Trailers part # CE27845 in various lengths depending on how you want to configure it. It appears like you will need at least 4 across the back. Then once you get to the second section a shorter one on the outside than on the inside. If you will match up the bunks with the length of the roller assemblies they will have the appropriate capacity. The rollers at the front end of the trailer I would replace the rubber portions of them to keep your v nose protected. I have linked the assorted lengths of bunks for your to match up.
These can be attached to the trailer using CE Smith Bolster and Swivel Bracket Assembly part # CE10000G-400G-4. These are also available in several lengths for you to be able to customize it for your situation.
![Randy B](https://images.etrailer.com/static/images/catg/people/604_tn.jpg)
Products Referenced in This Question
CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 84 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Strength of Steel Fender to Withstand 200 lb Utilizing as a Step
- Q&A: Where to Weld Tandem Axle Trailer Fenders w/ Backing Plates
- Article: Trailer Lighting Requirements
- Q&A: u-bolt
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Recommended Roller Bunks for 2020 18 Express Boat with Back Track Aluminum Trailer
- Q&A: Replacement Leaf Springs for Small Cox Boat Trailer
- Q&A: What Size Metal Trailer Fenders for Tire Size 20.5 x 8 - 10
- Q&A: Converting Boat Trailer From Rollers to Bunk Boards
- Article: Which Hitches are Made in the USA
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: What To Look For When Buying Ratchet Straps