Rear Camera Compatibility with 2020 Keystone Laredo 298srl

Question

Question:

What model camera do I need for a 2020 Keystone Laredo 298srl?

asked by: Brent P

1

Helpful Expert Reply:

For your 2020 Keystone Laredo 298srl, the factory mount and wiring is a fit for the Furrion Vision S systems. The Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 you asked from is a great option.

I've linked the page to all your options that are directly compatible.

expert reply by: Jason S

1

Answer 1

Start off by checking your pigtail. If you change your switch so that it is turned towards the side that isn't working and then swap your pigtails as well this will tell you if you need to simply replace a pigtail or if your have a bad regulator.…

view full answer...

Answer 2

The Winntec 6020 is an automatic changeover regulator, and the best option we have to replace it is with one from Camco, which is the following part number: - Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks #CAM59005 This…

view full answer...

Answer 3

I believe I understand what you are stating but the issue you are finding is in the location of the regulator and not with the components. The 11 inch water column is what is standard on any 5th wheel, travel trailer, or motorhome after the regulator…

view full answer...

Answer 4

On the Lippert underchassis storage pin and spare tire mount #LC125460 the center to center distance between the mounting brackets is approximately 70-1/2 inches. I have included some links that show some additional measurements. The overall…

view full answer...

Answer 5

Currently the Furrion Vision S Wireless RV Backup Camera System #FOS43TASF can only be viewed on the included monitor. While it is also offered with a 5" #FOS05TASF or 7" Screen #FR98NR there is no way to link it with the factory screen on…

view full answer...

Answer 6

I have a solution for you. I confirmed with my contact at Furrion that 2021 truck models have completely re-designed the wiring system in the truck. With this new design, 7-Way Vehicle Power Adapter Cable for Furrion RV Observation Camera #FR74FR…

view full answer...

Answer 7

In regards to troubleshooting the LED Marker Light RV Side Cameras part #FCE48TASL, the easiest thing to do would be to check and see if the running light built into the light is illuminated. If it does have power the camera likely either just needs…

view full answer...

Answer 8

Does your running light circuit currently have quite a few lights on it? Sounds like maybe the circuit is being overdrawn currently and there's not enough power left to operate the cameras. Since you know the circuit is active and you've also…

view full answer...

Answer 9

Everything that I have found on the 2021 Sporttrek 281 VBH shows the front marker lights being round. If they are round or mounted vertical they are removed and Item #FCE48TASL-05 is mounted in place. The thing that may be of concern with adding the…

view full answer...

Answer 10

Your 2021 Grand Design Reflection 240rl will be prewired for the Furrion Vision S Wireless System #FCE48TASL-05. I like the 5" screen kit that includes additional side view cameras as well. You can monitor all 3 cameras while driving or select…

view full answer...

Answer 11

Thanks for reaching out, i have a couple things for you to do. Let me explain below: *12V PWM Filter for RV Backup Camera Systems - Hardwire #VGR64VR. The newer GMC vehicles use PWM(Pulse With Modulation) in their electrical systems. The Furrion…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Rear Camera Compatibility with 2020 Keystone Laredo 298srl

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching