Replacement for Sunlink Starlink With Burned Out LED

Question

Question:

I have a 2015 Jayco Eagle. It is equipped with Sunlink Starlink series LED lights. I have a bulb burned out but cant get the lens off to replace it. Any ideas ? Thanks

asked by: Steven F

0

Expert Reply:

I don't have specifics on Sunlink Starlink as this is not a brand we carry but generally speaking you will need to replace the light when the LED board burns out as they are usually not replaceable. The most similar option we have to replace the Sunlink Starlink is the 6-LED Surface Mount Dome Style Light Fixture part # 277-000114.

expert reply by: Conner L

0

Answer 1

I wasn't able to find any model information on your Sunlink RSBF3NN-008 and we don't carry that particular brand, but we do have a number of recessed puck lights available that may work for you. You may be able to use the Gustafson RV Puck…

view full answer...

Answer 2

From what I can find of the Sunlink Lighting Star Series RSBF-4N-008 it is a 10"x 4" dome light with a button. Our closest option to this is the Gustafson RV LED Dome Light w/ Button #277-000492. This light is slightly smaller at 9" x…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 6

Considering how you'll likely be using this, if you don't already have an auxilliary battery on your trailer, you'll need to add one. You'll want a 12v battery, which can be sourced from a number of different places, but I recommend…

view full answer...

Answer 7

The part #277-000114 that you referenced can only turn on both lights or turn off both lights. They can not be activated independently. You may instead be interested in the LED Dome Light part #277-000340.

view full answer...

Answer 8

Turnbuckles like theHappiJac Original #LC182898 are more or less universal so you'll be able to use them with the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2303.

view full answer...

Answer 9

The Optronics LED RV Interior Light with Switch - 18 Diode - Surface Mount - White Housing #RVILL34 and the Patrick Distribution 18-LED Surface Mount Dome Style Light Fixture - 12V #277-000114. There is not a lumen rating on the slimmer light from…

view full answer...

Answer 10

We do have some triple rocker switch panels you can use for your 2019 Forest River Forester, but they don't have the light up feature when they are powered up. The standard switch kit we have is from JR Products and comes in the following colors:…

view full answer...

Answer 11

If you installed a decently sized deep cycle battery on your trailer you wouldn't have a problem powering the LED lights of it for the length of time mentioned since LED lights draw a fraction of the amperage as incandescent. Group 24, 27, and 31…

view full answer...

Answer 12

There are 3 different mounting bracket styles depending on how exactly you're wanting to install the Premium Slim LED Strip Light #TN38ZR: - Standard Mount #TN22VR - 45 Degree Mount #TN34ZR - 90 Degree Mount #TN54ZR These different styles will…

view full answer...

Replacement for Sunlink Starlink With Burned Out LED

Product Page this Question was Asked From

Continue Researching