Replacement Bearing and Races for 1-1/16 Inch and 1-3/8 Inch Inner Diameter
Question:
I need a Axles Ware Sleeve for the Weal Bearings Seal - Bearing Kit - 1 1/16 and 1 3/8
asked by: Jeff B
Expert Reply:
For your bearing kit of bearings, races, and seal for your dimensions, you will want the following:
-Bearing # LM48548 for your 1-3/8 inch bearing
-Race # LM48510
-Bearing # L44649 for your 1-1/16 inch bearing
-Race # L44610
Because it doesn't come in a kit for this unique measurement, I recommend measuring for your seal using a digital caliper like # PTW80157. If I were just to guess, seal # 58846 is likely the fit.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM48548
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.375 Inch I.D.
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- TruRyde
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Race for LM48548 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.563 Inch O.D
- Bearing LM48548
- Race LM48510
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Q&A: Is Sealant Required for the Replacement Rubber Grommet for RV Black Water Tanks
- Q&A: Recommended Solution for a Taller Toilet Floor Flange
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Q&A: Can Trailer Spindle Be Mounted Directly to Trailer Frame Instead of Axle
- Q&A: Solution for 2,200 lb Axle with Short Spindles to Replace Hubs with 5 Lug Bolt Pattern
- Q&A: Replacement Hub/Drum Assembly Needed for a Dexter 8-147 Assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Where to Position the Trailer Axle?
- Article: Brake Controller Installation: Starting from Scratch