Replacement Mounting Brackets for Firestone Ride-Rite Air Helper Springs F2550

Question

Question:

do you handle this item? Ride-Rite Air-Spring-Helper-Suspension-Kit-Bracket-Set-TR2550

asked by: Dave

0

Expert Reply:

We have the whole air bag kit as part # F2550 and then all of the individual pieces, but we don't have all of the brackets put together as a whole kit. With that being said, below is a list of the parts in that kit. You will need 2 of each aside from the fuel line bracket and the heat shield; you'll only need one of those:

Fuel Line Bracket - # F2135825428
Upper Bracket - # F5572
Lower Bracket - # F5380
Saddle Bracket - # F5379
Axle Strap Bracket - # F2135821163
Spacer Block - # F5477
Heat Shield - # F2135821004

I have linked all of these on a page for you and am attaching the link so all you have to do is change the quantities and add them to your cart.

expert reply by: Jon G

0

Answer 1

The lip is supposed to be there. It appears to be a way to allow the bracket to set more level than what the frame of the truck allows since it is angled and not parallel to the ground.

view full answer...

Answer 2

The Firestone Ride-Rite Air Helper Springs #F2550 in conjunction with the Reese Quick-Install Custom Brackets #RP50082 should be able to be installed without interference. The mounting brackets for the Firestone Ride-Rite #F2550 attach to inboard…

view full answer...

Answer 3

We do not have a complete kit of all installation parts for Firestone Ride-Rite Air Helper Springs #F2550, minus just the springs. We recommend using an entire new air bag kit since the combined cost of all the individual parts you'd need…

view full answer...

Answer 4

To replace your lower bracket, I recommend the Replacement Lower Bracket for Firestone Ride-Rite Air Helper Springs Kit F2535 #F5726. The bail clamp is Replacement Bail Clamp for Firestone Ride-Rite Air Helper Springs F2550 and F2535 #F3077. The…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Mounting Brackets for Firestone Ride-Rite Air Helper Springs F2550

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching