Does Curt Trailer Hitch Fit 2015 Lexus RX 350 Sport
Question:
Items says both it excludes and includes the F-Sport. I need this for a 2015 Lexus RX-350 F-Sport C13143
asked by: Greg L
Expert Reply:
The Curt Trailer Hitch Receiver part # C13143 fits both the 2015 Lexus RX-350 and Lexus RX-350 F-sport so you are good to go. This is a Class III 2" trailer hitch receiver that has a nice concealed cross tube design so the only portion of the hitch that is visible is the receiver tube for a clean OEM style look. I have attached an installation video for your reference.
If you need trailer wiring and the Lexus does not have a factory tow package, I recommend Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118255. If your Lexus does have the factory tow package, I recommend Tekonsha T-One Vehicle wiring harness part # 118252. The Tekonsha brand is my recommendation because the brand is a bit more reliable than the other options available in our experience.
If you plan on doing some towing you may consider the etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If you are not sure how much rise/drop you may need in a ball mount to tow your trailer level, I recommend to take a look at the helpful article I have attached about how to figure the amount of rise or drop you may need.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Raise Your Travel Trailer Height
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: B&W 4 Inch Offset Gooseneck Ball for a 2015 GMC Sierra 2500 Short Bed
- Q&A: Recommended Replacement AC Unit For A Coleman Mach On A 2000 Mesa Pop Up Camper
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Pintle-Hitches
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Q&A: Install Instructions Link for Lippert Lift Kit # LC382741
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Where to Position the Trailer Axle?