Recommended Replacement Landing Gear for a 2010 NorthRidge 320 RLQ

Question:

I am looking for the lead and follow landing gear for my 2010 North Ridge 320 RLQ.

asked by: Kevin S

Expert Reply:

To replace the landing gear on your 2010 NorthRidge 320 RLQ you should be able to use the Landing Gear Set w/ Handle # RVLG-8HDL which has an 8,000 lbs weight rating and a 36-1/2" lift. While I don't know exactly what landing gear your RV currently has, you can verify fitment by simply measuring between your weld stops. If they measure 15-1/2" apart on the inside (17-1/2" on the outside) then this landing gear will definitely fit.

Your current motor should fit with this (if you have one) but if you wanted to upgrade that as well so you have a whole new system then you need part # LC142178 for the motor and you can use part # LC145236 for a new switch.

If you're wanting to upgrade your landing gear instead of just replacing it then I highly recommend the Reese Landing Gear Set # RP500708. This is rated for 8,000 lbs, has a 36" lift, and weld stops in the same locations as what I mentioned above, but the real benefit comes with the dual motors and the spring loaded pins for the drop legs. These combine to cut the time it takes for you to level your trailer dramatically.

I've attached review videos for both of these options for you to check out.

expert reply by: Jon G