Recommended Bolt-On D-Ring for Retaining Ring on Trailer Tongue
Question:
I apologize. My question was too ambiguous. The bracket I seek is for a trailer tongue jack. I already have several weld-on brackets. I need 2 that use the removable round retaining ring 2 5/8 dia. that keeps the jack connected to the mounting bracket. Each side of the trailer jack mounting bracket has a series of holes for different spacing of the mounting bolts. The bracket does not interfere with the swing storage function of the jack. I hope this description is adequate.
asked by: Donald R
Helpful Expert Reply:
For your retaining ring mounts on the trailer tongue, I recommend using the Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs # LRB1. This is the strongest bolt on option we have. Anything stronger would require welding.
Products Referenced in This Question
Replacement Snap Ring for Bulldog Snap-Ring Swivel Jacks - Qty 1
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Snap Ring
- Bulldog
more information >
Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- etrailer
more information >
Replacement Mounting Kit for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- etrailer
more information >
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Tie-Down Cleats and Rings
- 4000 lbs
- D-Ring
- Surface Mount - Bolt-On
- Brophy
more information >
Continue Researching
- Q&A: How To Install The Advent Air RV Air Conditioner System With ACTH12 Thermostat
- Q&A: Installation Instructions for Advent Air Rooftop RV Air Conditioner # ACM135
- Q&A: Can Curt D-Ring Tie Down Anchor Be Welded to Aluminum Trailer
- Q&A: Can I Use A 10mm Bolt Instead Of The 3/8 Bolt With The CargoBuckle Ratchet Straps IMF18800
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Recommended Way to Install Heavy Steel D-Ring Tie Down to Aluminum Floor of Car Hauler
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Lighting Requirements
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Types of Trailer Hitches: How and Why to Use Each
Donald
5/1/2020
I apologize. My question was too ambiguous. The bracket I seek is for a trailer tongue jack. I already have several weld-on brackets. I need 2 that use the removable round retaining ring 2 5/8 dia. that keeps the jack connected to the mounting bracket. Each side of the trailer jack mounting bracket has a series of holes for different spacing of the mounting bolts. The bracket does not interfere with the swing storage function of the jack. I hope this description is adequate.