Replacement Motor and Control Unit for Kwikee Series 39 Steps

Question

Question:

The series 39 step on my 1999 Damon Ultrasport quit opening and closing. There is still power to the unit, but it won’t operate. The gearbox seems fine. Is there a replacement kit for the electrical components? If so,, what do I need? Thanks,

asked by: Dan S

0

Expert Reply:

The replacement components for your Kwikee Series 39 Steps on your 1999 Damon Ultrasport include the following:

Control Unit - # LC379606
Motor - # LC379147
Gearbox - # LC379161

Since your gearbox looks to be in good working order I'd try applying power to the motor directly to see if everything operates as it should. If it does then I'd agree that just the control unit needs to be replaced. If it doesn't then you likely need to replace the motor as well.

If your gearbox needs to be replaced too then we have the Motor Upgrade Kit # LC379769 which includes all 3 parts.

expert reply by: Jon G

0

click to enlarge

Answer 1

It sounds like you're looking for the Replacement Gear Box and B Linkage for Kwikee Electric RV Steps #LC379161. This includes the gearbox and the linkage so you should be good to go for your Kwikee 28, 31, 37, or 39 steps!

view full answer...

Answer 2

I spoke with my contact regarding your Kwikee 39 Series (model 909506000) step assembly. He stated that the Motor Conversion/Upgrade Kit #LC379145 you referenced is actually not compatible with your particular Series 39 assembly. You will instead…

view full answer...

Answer 3

We've checked with Kwikee about the Series 39 steps like you have in the past and for a replacement motor setup they have told us the solution is the part #LC379769.

view full answer...

Answer 4

So while we do have some options for you, there are no longer specific motors and gearboxes for electric steps manufactured before 1999, so for your 1989 Pace Arrow, what you will likely need is a motor upgrade kit, which includes the motor, linkage,…

view full answer...

Answer 5

I wish we had just the Style B linkage arm but the only solution we have would be the part #LC379161 you referenced which includes the linkage arm and step gear. This is a fit for your model 28 Kwikee though.

view full answer...

Answer 6

The correct gear/linkage that you need for your Kwikee 28 Series Steps is the Lippert Components Kwikee Step Gear/Linkage with B part #LC379161 and the correct motor is the Lippert Components Kwikee Motor and Screws for New IMGL Step part #LC379147.…

view full answer...

Answer 7

If you just need the gearbox, the linkage will have an A, B, or C. Once you know which one you have, then you will need one of the following: Lippert Components Kwikee Step Gear/Linkage with A #LC379160 Lippert Components Kwikee Step Gear/Linkage…

view full answer...

Answer 8

The motor for both the 28 and 28A series steps is the same according to the manufacturer's identification guide. To replace this component you will need the Lippert Components Kwikee Motor and Screws for New IMGL Step part #LC379147. The Kwikee…

view full answer...

Answer 9

The Replacement Control Unit for Kwikee Electric RV Steps - 2 Door Switch Kits #LC379606 is the correct replacement control unit for 909513. It does come with the switches though and there isn't a replacement unit for your model that comes alone…

view full answer...

Answer 10

The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606.

view full answer...

Answer 11

We've checked with Lippert before and the correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components Kwikee Control Unit part #LC379606 that you referenced.

view full answer...

Answer 12

The only control module that you can use to replace your 909513 controller on your 1997 Winnebago Adventurer is the Lippert Components Kwikee Control Unit #LC379606. Just as the other answer page stated, since your steps are older this may not allow…

view full answer...