Torque Requirements for Adjustment Bolts of Demco Rail Kit Adapter # DM6333

Question

Question:

I purchased the Demco 6333 and had to adjust the puck system to fit the truck puck hold down. After this adjustment I wanted to torque the 9/16 bolts to a specific ft lbs but couldn’t find that specification. Could you help with this?

asked by: Art P

0

Expert Reply:

According to the Demco install instructions I attached for the # DM6333 all of the hardware that holds the pucks in position should be torqued to 35 ft lbs.

expert reply by: Jameson C

0

Answer 1

The Demco GM rail kit adapter part #DM6333 that you referenced does provide the correct set of fifth wheel rails for your PullRite 2900 hitch to attach to so yes this is a correct combination of parts. There is some adjustment in the feet of this…

view full answer...

Answer 2

We have the Demco Adapter part #DM6333 which fits the OEM rail kit of your 2021 Chevy Silverado 2500 short bed and is also compatible with a Curt A20 slider hitch #C55DR.

view full answer...

Answer 3

The B and W Patriot Slider hitch installs in a set of slots that are wider than what the #DM6333 offers. Normally fifth wheel rails have three sets of slots but these only have the two. To use a B and W Slider hitch with your 2021 Chevy Silverado…

view full answer...

Answer 4

If you have some slop after installing the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package #DM6333, you can try to adjust the washers by adding more to one side and/or taking them away from another. If one handle feels…

view full answer...

Answer 5

The center section of the B&W Patriot #BWRVK3270 makes contact with the Demco 5th Wheel Rail Adapter #DM6333 handles and so it cannot seat properly in the mounting position. Currently (May 2020) there are no other base rail adapters that will…

view full answer...

Answer 6

B&W offers a replacement slider unit for the Patriot 5th wheel hitch, part #BWRVB3270. You'd simply remove the hitch head from the current stationary model and install it on the slider. This being said, the problem comes in when you try to…

view full answer...

Answer 7

If you have a 5th wheel hitch which mounts using above bed industry standard base rails then you can use the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package part #DM6333 to use this on a 2020 GMC Sierra 2500.

view full answer...

Answer 8

If your 2020 Chevy 2500HD has the factory tow package with OEM puck system then any hitch made for the CHEVY puck system will have legs that drop right into the pucks in the bed of your truck. If you have a hitch not specifically made for the Chevy…

view full answer...

Answer 9

The Pullrite SuperGlide 2900 5th wheel hitch fits industry-standard base rails, and we do have an adapter that will allow you to use that hitch in your 2022 GMC Sierra 2500 with the 5th wheel prep package: - Demco 5th Wheel Rail Adapter for Chevy/GMC…

view full answer...

Answer 10

I spoke to a representative with Demco about your Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs, part #DM8550046. and he gave me some things for you to check. The first thing he suggested is to…

view full answer...

Answer 11

The correct Sidewinder wedge to use with the Demco Recon hitch part #DM8550043 that you referenced is the #SWW-05.

view full answer...

Answer 12

The size of the king pin on the trailer's pin box is an industry standard. Therefore, the B&W Companion 5th Wheel Trailer Hitch part #BWRVK3400-5W will work with your trailer unless you have a Sidewinder/Revolution pin box. In order for this…

view full answer...

Torque Requirements for Adjustment Bolts of Demco Rail Kit Adapter # DM6333

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching