Curt Q25 5th Wheel Hitch Legs for 2020 Chevy/GMC Towing Prep Package

Question

Question:

My hitch is A curt Q25 and it’s in a 2017 GM puck system. I may be purchasing a 2020 Silverado so I need to know the part number I need for the legs that will allow me to use the Q25 head thank you

asked by: Scott D

0

Expert Reply:

We have exactly what you need with the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package # CU53FR. This is designed to fit your existing Curt Q25 head # C16565, as well as the new puck system on a 2020 Chevrolet Silverado 2500/3500 with the long bed.

expert reply by: Carla M

0

Answer 1

I can understand why this is frustrating, but I've got just what you're looking for. You can use the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package - 25,000 lbs #CU53FR with your Curt Q20 hitch head. These legs are…

view full answer...

Answer 2

You need the Curt Q20 5th Wheel Trailer Hitch #C57FR. This hitch connects directly to the factory in bed hitch/puck system in your 2022 GMC Sierra 3500 long bed. You will not need any special adapter or have to deal with extra parts. If you already…

view full answer...

Answer 3

In order to use the Curt Q20 5th Wheel Trailer on a 2020 GMC Sierra 3500 you can remove the Curt Q20 5th Wheel Hitch Head part #C16530 and attach it to the Replacement Base for Curt Q20 for Chevy/GMC Pucks part #CU53FR. This is a fixed hitch base…

view full answer...

Answer 4

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together,…

view full answer...

Answer 5

Yes, I do and have listed them below: The Replacement Base for B&W Companion item #BWRVB3710 weighs 83 lbs. The Replacement Head Assembly for B&W Companion item #BWRVC3006 weighs 70 lbs. The B&W Companion OEM 5th Wheel Hitch…

view full answer...

Answer 6

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Everything you mentioned will work...the Retrax Pro XR part #RTX84QR that fits your 2024 GMC Sierra 2500 short bed can be used with the Yakima OverHaul HD Ladder Rack part #Y01151-5955 which is then also compatible with the Yakima SkyRise HD #Y07437.…

view full answer...

Answer 9

Yes, it will. The B&W Companion OEM 5th Wheel Hitch item #BWRVK3710 will work with the Replacement Wedge Block for Lippert Turning Point Pin Box item #LC79UD on a Reese Sidewinder. However, if you don't already have the Turning Point Wedge…

view full answer...

Answer 10

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 11

For your 2023 GMC Sierra 3500 you are going to want the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs load leveling capacity so they will offer plenty of support for your 5th wheel trailer. They are compatible…

view full answer...

Answer 12

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Curt Q25 5th Wheel Hitch Legs for 2020 Chevy/GMC Towing Prep Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching