Locating Replacement Grease Seals for Old Calkins Trailer
Question:
Its an older trailer with 3/4inch bearings. Cant find the grease seals.
asked by: Don B
Expert Reply:
Given the Inside Diameter of the bearing you referenced, I'm guessing you have a LM11949 bearing. The LM11949 bearing has a .75 inch inner diameter, and is compatible with the LM11910 race. A grease seal will typically have an OD that matches that of the race and an ID that closely matches the diameter of the spindle where it rides. Assuming the spindle surface that the seal rides against is also .75 of an inch in diameter, the seal you need will have an ID of approximately .75 and an OD of about 1.781.
We don't offer any seals with an ID of .75, but it's certainly possible that the seal surface of the spindle is larger in diameter than the surface where the bearings ride. If you can get me a measurement of the spindle where the seal rides, I might have better luck in finding you a replacement. The best way to get an accurate measurement would be a caliper like # PTW80157 as a ruler or measuring tape wouldn't be accurate enough.
As you can see in the linked diagram, it's not uncommon for the spindle diameter where the seal rides to be different from that of the bearing surface.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Top Gifts for Dads in 2024
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Roof Vent Cover for Lid Marked AS-13M-VDO449 ANS Z26 1
- Article: Trailer Maintenance Schedule
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Trailer Brake Actuator Cycles On and Off
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Actuator Not Working with Brake Pedal
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: Weight Capacity Of Lippert Spare Tire Winch For Over sized Tire
- Q&A: Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing