Repacking Hubs for Boat Trailer 2003 Tracker Dual Axle
Question:
I have a 2003 tracker trailer with four dual wheels It is only used twice per 12 months. Shpuld I repack the bearings? It has the water proof cover & makes no noise. Thanks, Bill
asked by: Bill M
Expert Reply:
If you have not repacked the bearings since new or in the last 2 years I would definitely repack the bearings. The time it takes will be quickly forgotten when you are out on the road and assured that your trailer is safe and not going to cause you problems. Because boat trailers are backed into the water they are subject to getting water in the bearings and breaking down the grease inside. If the boat is backed into the water when the bearings are still warm from transporting the boat then the risk of water entering past the grease seals is greater. The seals on the back side of the hubs are grease seals meant to keep the grease in, not water out, so some water can be introduced, without you knowing about it. We have LubriMatic Marine Trailer Wheel Bearing Grease item # L54FR, for boat wheel bearings and parts for your trailer if needed. I have posted a link below to videos on repacking and inspecting trailer bearings for you. Your best bet is to repack and relax, you will be glad you did in the long run.
Products Referenced in This Question
LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Petroleum-Based
- Marine Bearing Grease
- Calcium Sulfonate
- 3 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.328 Inch
- Bearing Buddy
more information >
Continue Researching
- Q&A: Tandem Axle Trailer Close to Dimensions of 63” - 15” - 8.5”
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Q&A: Width of etrailer Brand HP54VR Tandem Axle Teardrop Style Trailer Fenders
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Timken Bearing kit for Dexter 4,400 lb Trailer Axle
- Article: My Trailer Hitch Doesn't Fit
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Big Truck Big RV
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Most Popular Wheel Bearings
- Article: Which Sway Control Hitch is Right For Your Trailer?