Replacement Hitch Mounting Bolts for Hitch Install on 2005 Hyundai Santa Fe
Question:
I have a 2005 Santa Fe. I bought a used hitch with 6 holes. The two rear are same as tow hook but the one towards front are bigger. What size please and thanks
asked by: Ken
Expert Reply:
Do you know which hitch you have? There should be a sticker on it with a part number. The Curt # C13073 you'd looked at would be a fit for 2010-2013 Hyundai Santa Fe models and wouldn't fit your vehicle.
On your model year, the larger front-most holes closest to the front of the vehicle are M12 x 1.25 x 40mm Class 10.9 Hex Bolts which use a 1/2 inch conical toothed washer and the remaining bolts closer to the rear of the vehicle are M10 x 1.25 x 40mm Class 8.8 hex bolts which use a 3/8 inch conical toothed washer.
Due to the age of the vehicle, there will likely be quite a bit of road gunk and corrosion built up into the nuts that are welded up into the frame member. I'd recommend giving those a good shot of a spray lubricant like WD-40 and a good scrub with a battery terminal cleaning brush like # DW00254. If the corrosion is really severe, you'll need a thread tap for the M10 bolts and the M12 bolts.
I've linked you to an installation video for the hitch I mentioned that fits your Santa Fe.
Products Referenced in This Question
Battery Post and Terminal Cleaner - Wire Brush
- Wiring
- Tools for Wiring
- Wire Brush
- Deka
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What Size are the Trailer Hitch Receiver Bolts and Weld Nuts on a 2012 Hyundai Santa Fe
- Q&A: What Size Tap Is Needed To Chase Threads 2012 Hyundai Santa Fe When Installing Curt Trailer Hitch?
- Q&A: Correct Hitch Lock and Cable For Swagman XTC-2 Tilt Bike Rack
- Q&A: Comparing Curt # 13195 and Draw-Tite # 75908 for 2017 Kia Sorento
- Q&A: Combination Keel/Caster Roller Assembly for Tandem Axle Shorelander Boat Trailer
- Q&A: How to Determine if 2016 Kia Sorento Has Factory Tow Prep Package
- Q&A: Solution for Weld Nuts on 2012 Hyundai Santa Fe that Won't Allow Hitch Bolts to Thread In
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Hitch Receiver Sizes