Recommended Hitch and Wiring For 2019 Honda CR-V With Hands Free Sensors
Question:
Hello, Does a # 76128 fit the above vehicle and allow for the hands free sensor to remain operational withour any modification?2019 Honda CRV Touring with hands free sensor
asked by: Jerry
Expert Reply:
The Draw-Tite Class III 2" hitch receiver part # 76128 is a fit for your 2019 Honda CR-V Touring with hands free lift gate sensors! The sensors on either side of the hitch will work to lift the hatch but the center one will be blocked by the hitch. As long as you kick to either side of the hitch the feature will still work without any modifications. According to previous customers you just "have to find the sweet spot". I have attached an installation video for your reference.
If you need trailer wiring, I recommend Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118741 which has a higher amp capacity then the other brands to protect your vehicle's electrical system. I have attached an installation video of this as well.
If you plan on doing some towing you may consider the etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If you are not sure how much rise/drop you may need in a ball mount to tow your trailer level, I recommend to take a look at the helpful article I have attached about how to figure the amount of rise or drop you may need.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Article: Car Camping Checklist
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Article: What To Look For When Buying Ratchet Straps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Hitch for a 2024 Honda CR-V Hybrid
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What Type of Fluid to Use in Lippert Hydraulic Leveling Systems
- Q&A: Finding A Replacement Electric Winch For 2007 Rockwood Popup Camper
- Article: Roof Rack Information