Adapter Rail Kit for PullRite SuperGlide 2900 on 2019 Chevy Silverado 3500 with Puck System

Question

Question:

will a 2900 pullrite superglide attach to a reese rail adaptor #30156?

asked by: JAMES L

0

Expert Reply:

I do have a solution for you, but the Reese Rail Adapter # RP30156 that you referenced is a fit for the Ford puck system so it wouldn't be compatible with your 2019 Chevy Silverado 3500 puck system.

Instead you can use the Demco Rail Adapter # DM6194 which is essentially the same thing as the Reese option, just from Demco and it fits your short bed pickup. If you have a long bed then you need the Demco Rail Adapter # DM6206 instead. At this time (March 2020) Reese doesn't have a rail adapter for the new Chevy puck system and the Curt Adapter # C16023 is designed so that it only works with the Curt sliding hitches (which I don't really understand).

I have attached a photo a customer sent in of this adapter on a Denali for you to reference as well as a video of the adapter being installed on a 2018 Chevy Silverado 3500 for you to check out. The autosliding 5th wheel hitch in the video is the Demco Hijacker # DM8550035.

expert reply by: Jon G

0

click to enlarge

Answer 1

Since you're wanting to switch to an auto-slider like the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000 lbs Item #DM8550035 you're unfortunately going to have to go with the above bed…

view full answer...

Answer 2

Yes, the Curt Q20 fifth wheel hitch you have would install in the same rail design as the Demco Hijacker part #DM8550035 that you referenced. This hitch would easily fit the rails you have in your truck and would provide you with a slider fifth…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Adapter Rail Kit for PullRite SuperGlide 2900 on 2019 Chevy Silverado 3500 with Puck System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching