Replacement Controller for Rieco Titan 300898 Leveling System

Question

Question:

I have an older system four point that used a control module number 300898 no hall monitor sensors that looks just like this controller. My question is whether this controller will replace my controller? I went to Reich-Titan and Lippert Components and they have no idea what I should use. Both said to contact the other.

asked by: Eric H

1

Helpful Expert Reply:

Thanks for the picture! That's definitely the same controller as our part # LC242623 so this would be exactly what you'd want.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The 676004 number you provided as a replacement fuse for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC358590 returns to a 30A fuse instead of a 35A fuse. That being said, we do not carry that fuse. You can however take your…

view full answer...

Answer 2

The blank screen on your LCI Ground Control 3.0 could be either a power issue or a control module issue. I recommend first remove the panel and unplug it from the back leaving it unplugged for at least 15 minutes so that it loses all of the residual…

view full answer...

Answer 3

I do have some things for you to check but there is not really a reset button for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System. The first thing you will need to do is obtain a multimeter. Once you have this then you will need…

view full answer...

Answer 4

The Replacement 4-Point Controller for Lippert Components Ground Control 2.0 Electric Leveling System #LC242623 is not the same as the Replacement Control Module for Lippert Ground Control 3.0 Electric Leveling System #LC304136. Although they look…

view full answer...

Answer 5

I reached out to Lippert who informed me your Power Gear controller 140-1224 Rev 0G is obsolete. It was replaced with the Lippert part number 372854 but that part is also now obsolete. At this point your options are to try and have your controller…

view full answer...

Answer 6

Hey David, thanks for the picture. I was able to track down a spec sheet for your Dexter axle which I have included below. The 031-029-02 bearing is item #15123 and the 031-030-02 bearing is item #25580. For a bearing kit you can use part #BK3-110…

view full answer...

Answer 7

To replace the Level Up controller on your 2012 Dutchmen Infinity 3750FL you need the Replacement OneControl Advantage Controller #LC88TF. I confirmed this is what you're needing with my contact at Lippert!

view full answer...

Answer 8

Yes, the Replacement Control Module for Lippert Ground Control 3.0 Leveling System #LC85ED will work as a replacement, however according to Lippert you need to have the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV…

view full answer...

Answer 9

I sent all of this to my tech contact at LCI to see what they this is the problem and they were able to come up with a way to use the voltage readings to determine where the issue is: There are 4 wires on the harness as follows Black= power (need to…

view full answer...

Answer 10

It sounds like you're looking for the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System #LC74FR which works with the Level-Up system. This is the touch pad "controller" but if you are looking…

view full answer...

Replacement Controller for Rieco Titan 300898 Leveling System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching