Correct Braking Assemblies for Haynes Axle with 6 Bolts
Question:
Could I possibly get the spacing measurement between the bolts, just a center to center measurement would help me figure out if its what I need. It's an older Hayes axle, my flanges have 6 bolts and I'm hoping that the bolt spacing is the same so I can just use 5 bolts
asked by: Winfred B
Expert Reply:
The larger Haynes Axles did in fact have a 6 bolt brake mounting flange but the braking assemblies actually only uses five bolts to attach. Therefore, the Hayes/AL-KO Hydraulic Brake Assembly part # K23-524-00 is very what you need. That said, you would need to order a quantity of two in order to cover both sides of the axle as the above part is one for one assembly. If you want to buy both you can simply order two of the above or go with the Hayes/AL-KO Hydraulic Brake Kit part # K23-524-00-2.
I have attached a photo below with some measurements.
Products Referenced in This Question
Hayes/AL-KO Hydraulic Brake Kit - Duo Servo - 12-1/4" - Left Hand/Right Hand - 9K to 12K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- 12-1/4 x 3-1/2 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 12000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Hayes/AL-KO Hydraulic Brake Assembly - Duo Servo - 12-1/4" - Left Hand/Right Hand - 9K to 12K
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- LH
- 9000 - 12000 lbs
- Brake Assembly
- 12-1/4 x 3-1/2 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Backing Plate for Electric Brakes on 10k Axles
- Video: Dexter Axle Trailer Brakes BRKH122508 Review
- Shop: Hayes/AL-KO Hydraulic Brake Kit - Duo Servo - 12-1/4" - Left Hand/Right Hand - 9K to 12K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 9K to 10K
- Q&A: Dimensions for the 7-Bolt Mounting Pattern on the Electric Trailer Brake # AKEBRK-10R
- Q&A: Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
- Q&A: Looking For Drum Brakes That Fit An 8,000 Pound Axle
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Shop: Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 8,000 lbs to 9,000 lbs
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 8K
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - K23-524-00-2 Review
- Search Results: k23~524~00
- Shop: Brake Controller
- Q&A: Correct Replacement Braking Assemblies for an Older Hayes AL-KO 12K Axle
- Q&A: Will Hayes/AL-KO Hydraulic Brake Kit # K23-524-00-2 Work with EOH Actuator
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HBA-12 Review
- Search Results: electric brake conversion kit
- Video: Review of a Trailer Suspension Enhancement System - TTRA15252
- Video: Redline Trailer Brakes 4-44-1 Review
- Search Results: 28580
- Search Results: 25580
- Search Results: 91030
- Video: Redline Trailer Suspension - Leaf Spring Suspension - HAP-203-02 Review
- Video: Review of Dexter Axle Replacement Left Brake Shoes 12-1/4" Duo-Servo Hydraulic Brakes - BP04-260