Troubleshooting Trailer Running Light Circuit of 2015 Chevy Equinox Not Active
Question:
Im having running lights problems in the harness, brake lights and turning lights work, I turn turning lights off and release the brake, turn the headlights and nothing, I dont have running light power, but other ones work, fuse in fusebox is good
asked by: Mike G
Expert Reply:
Typically when the running light circuit of a vehicle appears to be dead it's just corrosion built up on the pins of the trailer wiring connectors of the associated circuit. What you'd want to do is first try cleaning all of the pins and then making sure they are bent as well.
I attached a help article with more info on troubleshooting trailer wiring for you to check out as well.
Product Page this Question was Asked From
Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Do 8k Oil Bath End Caps On Lippert Axle Interchange With Dexter End Caps
- Q&A: Recommended Electric Over Hydraulic Brake Set Up for 2016 Montana 3710FL 5th Wheel
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Is Adapter Needed to Install Dometic Water Heater # DMC74FR In Place of Atwood
- Article: Brake Controller Installation: Starting from Scratch
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Q&A: Recommended Wet Bolt and 2-1/4" Shackle Strap Kit for Tandem Axle Trailer
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Hitch Adapters and Extenders
- Article: Troubleshooting Brake Controller Installations