Troubleshooting P1 or PL Error Code of Tekonsha Primus IQ Brake Controller part # TK90160
Question:
P 1 code I can hold the brakes manually have power to the trailer it goes off in about 20 seconds
asked by: Robert L
0
Expert Reply:
The P.L. code that you are seeing on your Tekonsha Primus IQ Brake Controller part # TK90160 means there is a power interruption while the brake pedal is depressed. This typically is caused by a bad or insufficient ground. You can test this by attaching the white wire from this controller directly to the negative side of a vehicle battery to see if the problem goes away.
I also attached an FAQ article on troubleshooting brake controller installations for you to check out.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Tow Wiring for a 2023 Kia Telluride With LED Lights
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Q&A: What Gauge Wire Does The Curt USCAR Connector C56229 Use?
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Q&A: How to Charge a Trailer Battery Through a 7-Way Connector
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Proper Gauge Wire for Installation of a Brake Controller and Trailer Brakes