Parts Needed To Tow Small Pace American 4 x 6 Enclosed Trailer With 2020 Jeep Cherokee
Question:
My 2020 Jeep Cherokee did not come with a 4-way. I own a party planning service and I need to tow a small cargo trailer for my party lights and other various party materials. I tow a 2020 Pace American 4 x 6 Enclosed Cargo Trailer it does not have brakes. What ball mount can I use I have a hitch i measured it 13" to the ground
asked by: Lauren
Expert Reply:
To tow the small Pace American 4 x 6 enclosed cargo trailer with the 2020 Jeep Cherokee you will need a hitch (you already have), 4-way wiring, a ball mount, lock and hitch ball.
I recommend Curt Vehicle Wiring Harness with 4-Pole Connector part # C56406 which is known to last a bit longer compared to the other wiring options available.
You also need Curt Ball Mount part # C45070 which will give you the rise that you need. If your coupler is the standard height of 17" from the bottom of the coupler to the ground you will need the 4" rise of the Curt Ball mount. I do recommend to measure from the ground to the bottom of the coupler to make sure you have standard height coupler. If you do not then please let me know the coupler height and I can recommend different parts.
From my research your trailer coupler needs a 2" ball I recommend part # 63845 for a 2" ball.
To protect your investment I recommend to use a hitch lock part # 1480DAT.
Products Referenced in This Question
Trailer Hitch Receiver Lock for 2" Trailer Hitches - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Master Lock
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Receiver For 2021 Jeep Cherokee Trailhawk That Protrudes Through Bumper
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can I Use the Curt 58963 Tow Harness and the Curt C56406 4-Way Connector on a 2020 Jeep Cherokee?
- Article: Flat Towing Package for 2019 Jeep Cherokee
- Q&A: Is There Way to Increase Towing Capacity of 2019 Jeep Grand Cherokee
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does the Galeo Ride GPS Tracking Device for Bikes Come with Everything Needed
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Anti-Rattle Devices
- Q&A: Pairing Instructions for the Galeo Ride GPS Tracking Device for Bikes
- Q&A: Recommended Trailer Hitch for 2019 Jeep Cherokee