Is a Trailer Wiring Converter Needed for a 2011 Jeep Liberty
Question:
I have a 2011 jeep liberty.first question. do I really need a converter.my vehicle has a converter installed and I have had many problems with power wire.the wire rubs against the frame and eventually breaks or corroads.. if I really need the converter,do they make a better power wire.thanks
asked by: Dave S
Expert Reply:
Yes, a converter is needed for a 2011 Jeep Liberty because one the tail light circuits are on separate wires and they need to be combined for a trailer and two the factory tail light circuits are not sufficient to power the lights on a trailer as well as the lights on the vehicle. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118554 which has one of the most durable converters on the market due to the potting which helps keeps the wires attached to the circuit board better.
In regards to the power wire, this will be the same for pretty much every kit and not something that you should have an issue with if installed properly. That said, if you use some wire loom like part # 7509-10 this will offer additional protection just be sure the wire is secure so it can't move and you avoid moving parts for the exhaust. I typically follow the brake lines as there is generally a panel to hide the wire behind.
Products Referenced in This Question
Wire Loom 1/4" Diameter, 10' Long
- Wiring
- Wiring Protection
- Wire Loom
- 1/4 Inch Diameter
- Spectro
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Best Trailer Hitch Receiver and Wiring Harness For a 2012 Jeep Liberty
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Correct Tow Wiring Harness for 2008 Jeep Liberty
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2008-2009 Jeep Liberty
- Q&A: Differences Between The Brake Buddy Select 3 And Brake Buddy Classic 3 Portable Braking Systems
- Q&A: Comparison of Wiring Harnesses to Fit 2011 Jeep Liberty and Other Parts Needed to Tow a Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Where is the Connection Point For Trailer Wiring Harness # 118384 on a 2011 Jeep Liberty
- Q&A: How Do You Determine If a 2006 Jeep Liberty Has the Tow Package Wiring?
- Article: Best Air Bag Suspension (2023)
- Article: How to Measure for Trailer Hitch Drop
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com