Front Mount Hitch Receiver for a 2020 Toyota 4Runner Limited

Question

Question:

Does it fit on 2020 4 runner limited model

asked by: David C

0

Expert Reply:

The Curt Front Mount Hitch # C31076 fits the SR5 and TRD models of the 2020 Toyota 4Runner. Since you have a Limited you need the Front Mount Hitch # C31054 instead.

Attached is a sample installation video on a 2012 4Runner that you can check out. If you let me know what you plan on using the front hitch for I can make additional recommendations as necessary.

expert reply by: Jon G

0

Answer 1

The Curt Front Hitch #C31076 will install on the front driver and passenger side frame rails. I have linked a picture showing the bolt holes on the passenger side frame rail and it will be the same for the driver's side. I checked and the Curt…

view full answer...

Answer 2

Completely removing the skid plate on your 2018 Toyota 4Runner to make room for a front mount hitch like the Curt #C31076 that you referenced will be much simpler than just trying to trim the needed areas to allow fitment of the hitch's mounting…

view full answer...

Answer 3

The Curt front hitch part number C31076 comes with bolts that are M10-1.25 x 35 mm and M12-1.25-35 mm.

view full answer...

Answer 4

Yes, the Curt Front Hitch part #C31076 has been confirmed as a fit for the 2014 Toyota 4Runner Trail Edition like what you have so it would work well for you.

view full answer...

Answer 5

Getting a dual hitch converter will pose some issues with towing. Whenever using an extension of any kind, you will reduce the capacity of the hitch by 50 percent. This isn't something you will want if you plan on hauling your trailer with your…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Lester, so the Curt Front Hitch #C31076 will be a fit for the 2022 Toyota 4RunnerTRD Off Road Premium. I can't speak on what Amazon says, but I doubt their product information is written by folks who actually know the products. I went ahead…

view full answer...

Answer 8

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 9

For your 2022 Toyota 4Runner with the factory tow package, the best brake controller is the Tow-Pro Elite from Redarc, and to mount it all you'll need is the correct wiring adapter: - Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR -…

view full answer...

Answer 10

Yes, the Redarc Tow-Pro Liberty Brake Controller #RED24FR will connect to your 2021 Toyota 4Runner with the Plug-and-Play Wiring Harness #RED49FR. Then you can use the Mounting Panel #331-TPSI-002 to mount the control knob in place of one of the…

view full answer...

Answer 11

For a torsion axle such as your Avan Aliner we have kits available that will give you some extra clearance. The Avan Aliner is a single axle trailer, so we have two kits that will work for you. Torsion axles must be side-mounted and not top mounted…

view full answer...