Sealed LED Trailer Lights for a 2006 Nitro 591 Boat Trailer
Question:
I currently have incondesent 6 1/2inch bulbs mounted in a grommet horizontal for tail lights. Im looking for led replacements that are waterproof and will except my current 3 prong connection. I see you have a couple of choices that look like they would meet my needs. The 10 diode vs the 48 diode? Any suggestion on best unit would be appreciated. The lights are for a 2006 nitro 591 boat trailor and I want the most reliable LEDs. Ive had multiple issues with incondescent Lights taking on water after only a year
asked by: John
Expert Reply:
The more diodes the LED lamp has, the brighter it would be so if that is a concern then go with a model that has more diodes. You can take a look at the 48 diode model, # STL70RB, in the review video I have included. These lights use a 3-prong wiring harness like # A45PB. I cannot promise that it will be the same as your existing 3-prong connector. If you have to make splices, I recommend sealing out water using liquid electrical tape, # SWC50122.
These lights can be mounted using grommet # a70gb and, if a bracket is needed, # BK70BB. Otherwise you would need an oval hole that measures 6-11/16 inches wide and 2-5/8 inches tall for the light and grommet to fit in.
Products Referenced in This Question
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 6-1/2 Inch Long
- Oval
- Optronics
more information >
Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 6-1/2 Inch Diameter
- Brackets
- Black
- Optronics
more information >
Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 48 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2-5/16W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: How Long Can You Boondock in an RV?
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Generator Set for 2019 Forest River Salem 30KQBSS Travel Trailer
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Can Redline 2-Way Pop-Up Roof Vent # 9106-2756 be Used in Rain
- Q&A: Damaged Caused to Travel Trailer Brake Drums and Bearings by High Temperatures
- Q&A: Max Amp Ratings for Furrion Chill RV Air Conditioner and Breaker
- Article: Gooseneck Trailer Hitch Information and Review
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Vent Screen and Screen Base to Replace Part Numbers VD0433 and VD0434 on 2011 Grey Wolf 26RL
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing