Weak/Intermittent Signal Error With Furrion Vision S Wireless RV Backup Camera System

Question:

I have a wireless Furrion S., less than a year old. All of a sudden, the monitor is saying no signal Intermittently, it will display a picture. Any thoughts on this?

asked by: Jerry K

Helpful Expert Reply:

I took a look at the instruction manual for the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF which is attached below as well and there are a few possible causes of the weak/intermittent signal issues you are experiencing. I have listed these causes for you below as outlined in the manual.

- Check if the camera antenna is fitted and secured correctly - it should be vertical.
- Distance between camera and monitor is too great. Reduce distance between Camera and Monitor.
- Large dense objects could be obscuring the signal. If possible, move the objects.
- Interference from electrical appliances may be affecting the wireless signal. Turn off the appliances when using the system.
- Interference from overhead power lines may be affecting the signal.
- Try unpairing and pairing

Please let me know if none of the above fix your issue.

expert reply by: Conner L

Tim W.

11/5/2021

Can I get a external antenna for my furring s series camera for I have a very week signal

Les D.

11/8/2021

I have attached a link for a Furrion S Series system. You can see that the outdoor camera has an outdoor antenna on it and the dash mount monitor has the same antenna. Are one of these antennas missing? The antenna replacement is # 772577 for the monitor or outdoor camera.

Tim W.

11/9/2021

@LesD all of the antennas are in place I was wandering if there is a external antenna that I can get to replace the one on the monitor

Les D.

11/11/2021

@TimW Sorry, but that one antenna is the only one that we have for that system.