Correct Trailer Hitch Fit for 1999 Chevy K2500 Pickup
Question:
Hello, will this fit my 1999 Chevy K2500 crew cab. I measured the frame width and it seems to be 34. Thanks
asked by: Robert J
Expert Reply:
The Curt Trailer Hitch Receiver # 13028 will fit your 1999 Chevy K2500 Crew Cab as long as it's a cab and chassis with a frame that measures 34" outside to outside. If your pickup is a standard pickup then you need the Curt Trailer Hitch # C13042 instead.
Installation instructions have been linked for both options that you can check out.
Since you have a pickup I'd imagine that you plan on using the trailer hitch for towing. To complete your towing setup you also need wiring, part # 118315 for a 4-Way or part # 20023 for a 7-Way, and then a ball mount like what comes in the kit # 989900.
I have attached a ball mount article that you can check out as well as an article that talks about where to find the pre-existing wiring on your truck if you are wanting to install the 7-Way connector for your trailer. If you have any other questions please feel free to reach back out.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
7-Way Pre-Wired Car Connector, 7' Lead
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7 Feet Long
- Universal Fit
- 7 Round - Blade
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Trailer Jack Recommendation for Dutton-Lainson Jack on Ranger Trailer
- Q&A: Troubleshooting Kodiak 225 Trailer Brake System that Keeps Breaking Calipers In Half
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between 7-Way RV and Utility Trailer Connectors
- Q&A: Recommended RV Exterior Ladder for 22 Ft Thor Four Winds RV
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Article: Big Truck Big RV
- Article: My Trailer Hitch Doesn't Fit
- Article: Pintle-Hitches
- Article: Best Ladder Racks