Parts Needed to Install 7-Way and Brake Controller in 2011 Hurricane Motorhome on F-53 Chassis
Question:
I have a 2011 Hurricane motor home on a F-53 chassis. I am installing a brake controller and converting my 4-way plug to a 7-way/4-way using your adapter kit. I believe I need to add a fuse and relay to the vehicle fuse panel. Can you tell me what relay and fuse will be required?
asked by: Horseman
Expert Reply:
Since your 2011 Ford F-53 motorhome has a factory 4-way the best and easiest way to go about installing a brake controller is going to be with the part # ETBC7L as it comes with everything needed to adapt the 4-way to a 7-way and wire in a brake controller. You will need to wire in an included relay but you would not need to also add relays to the motorhome wiring like you mentioned.
For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195 if you haven't picked out one yet. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy as it is incredibly reliable, works, well and is easy to use. It can easily be transferred to future vehicles as well.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller Installation on a Ford Full-Size Van
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How To Connect 4-Way Flat Vehicle Connector To 7-Way on Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Parts Needed to Install 7-Way Trailer Connector on 2021 Honda Odyssey
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Installing A Reese Brakeman Controller In A 202 Ford E250 With Factory 4-Flat
- Q&A: Trailer Hitch for a Lance Travel Trailer