Which Idler Hub Assembly for Timbren Suspension ASR2KHDS03
Question:
Hello, Will this hub kit: 84545UC1-EZ work on this suspension kit: ASR2KHDS03 ? Thank you,
asked by: David L
Expert Reply:
Yes. The Dexter Trailer Idler Hub Assembly # 84545UC1-EZ can be used with the Timbren Heavy Duty Axle-Less Trailer Suspension # ASR2KHDS03 since they both use:
Bearings: # L68149 inner, # L44649 outer
Races: # L68111 inner, # L44610 outer
Seal: 10-19 part # RG06-050 (pair)
The # 84545UC1-EZ has a 5 on 4-1/2 bolt pattern and comes with the bearings, races, seals, grease cap, wheel bolts, and lug nuts included.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Using Wheels From Jeep Wrangler on Tandem Axle Trailer
- Q&A: Does Westlake ST235/75R15 Radial Tire & Wheel Come Balanced
- Article: Where to Position the Trailer Axle?
- Q&A: Would Timbren Axle Less System for Wide Tires Allow for Wider Tires, How Much Clearance is Provided
- Q&A: What Type of Frame Clearance will Timbren Silent Ride TSR7000T05 Have
- Article: Pintle-Hitches
- Q&A: Timbren Axle Less System Recommendation for Off -Road Trailer that Weighs 1,500
- Q&A: Bolt Hole Spacing on the Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS02
- Q&A: Is There Trailer Axle Over Under Kit that Could Fit 5x8 Utility Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Lighting Requirements
- Article: How to Measure the Bolt Pattern of a Trailer Wheel