How to Determine Which Spindle Washer To Use With DL21792 Bearing Kit
Question:
looking for the correct spindle washer for these axels
asked by: Daniel M
Expert Reply:
The washer you'll want to use with the # DL21792 Bearing Kit is going to depend on whether you've got a standard round spindle, an EZ lube spindle, spindle with a tongue slot or a spindle with a D shape. Since you've got a BT8 spindle, the diameter is going to be 1", so we can narrow it down a bit. I've linked our entire selection of 1" inner diameter washers so that you can choose the appropriate replacement, but you'll want to use the same style that your spindle was originally equipped with.
As an example, the 1" Spindle Washer # SW1000 will work on round spindles with a 1" diameter that is not an EZ Lube spindle. If you've got an EZ lube spindle you'll use # 5-101.
Products Referenced in This Question
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: 58846
- Search Results: dust cap
- Search Results: grease seals
- Search Results: grease seal
- Search Results: referral code
- Search Results: grease cap
- Video: Review of DeeMaxx Ceramic Brake Pads With Steel Back Plates 3500 - 6000 LBS Caliper - DE38VR
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: DeeMaxx Single Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Q&A: Will These Grease Caps part # RG04-010 Fit my Dexter Axle
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap
- Q&A: Grease Cap Plug for Trailer Hub Dust Cover
- Search Results: 2 hrcm 10 dac
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Video: Review of DeeMaxx Trailer Brakes - 3.5K Slip-On Rotor Disc Brake Kit - DE42FR
- Video: Review of DeeMaxx Trailer Brakes - 3.5K 10 Inch Maxx Coat Disc Brake Assembly - DE89YR
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Q&A: Parts Needed to Install Electric Brakes On a Tandem Axle Trailer With 3,500 Torque Axles Salt Water
- Q&A: Replacement 7,000 lb Surge Brake Actuator for Drum or Disc Brakes
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Video: Kodiak Trailer Brakes KCMB10HRD Review
- Video: Redline Trailer Brakes 6-17 Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube BTR Spindle - TRU44FR
- Q&A: Replacement Spindle Nut, Washer and Retainer For Dexter Trailer Axle # 7685269-EB
- Article: Trailer Tire Sizing