Is the Ultra Bright LED Flood Light Vibration Resistant

Question

Question:

Can this light last in a vibration setting, To be used as a backup light on cattle trailer

asked by: Mark K

0

Expert Reply:

The Ultra Bright LED Flood Light part # 3371492196 is designed to be vibration resitant so it will work well on your cattle trailer. It is compatible with 12V DC and 24V DC systems and includes the bracket with stainless steel hardware.

expert reply by: Heather A

0

click to enlarge

Answer 1

The Ultra Bright LED Flood Light part #3371492196 is a 75 watt LED light. If its wired to a 12V system the amp draw is 6.25 amps. If its wired to a 24V system the amp draw is 3 amps. LED lights draw a very small amount of power compared to…

view full answer...

Answer 2

Since you wanted the brightest flood light possible, you definitely made the right choice with the 9,000 lumen Ultra Bright LED Flood Light #3371492196, and you have it absolutely correct in regards to the two wires. They are a power wire and ground…

view full answer...

Answer 3

As the Ultra Bright LED Flood Light part #3371492196 is a 75 watt LED light, the amperage draw when hooked to a 12V system will be 6.25 amps. This drops to 3 amps when wired to a 24V system. So it will depend on the voltage and amp hours the battery…

view full answer...

Answer 4

While we do not sell hitch extenders for 2-1/2" receivers, we may have a solution for you. Since most hitch extenders will reduce your towing capacity (usually by 50%), a better alternative is to use a longer ball mount for getting the clearance…

view full answer...

Answer 5

The Sealed, 6-1/2 inch Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear, item #BUL78CB, does not meet DOT FMVSS 108 requirements, for backup lights so it cannot be sold as a backup light. That does not mean that the light cannot…

view full answer...

Answer 6

While we do have great lights that are perfect for installing for visibility while backing up your trailer at night, we do not have a light that comes with a mounting pole for installation. With that being said, we do have a super bright solution…

view full answer...

Answer 7

The Ultra Bright LED Flood Light #3371492196 is sold individually. If you needed a pair of these you'd need to order a quantity of two.

view full answer...

Answer 8

Since you have a 7-way you have the reverse light circuit pin already present so you'd need just to wire from the center pin of the 7-way to reverse lights like the #BUL78CB.

view full answer...

Answer 9

The Buyers Products #3371492196 LED flood light does not have a built-in on/off switch. I would use the Seaflo #SE29VR Battery Disconnect switch for my outdoor switch, then to avoid drilling I would pick up some 3M heavy duty automotive mounting tape…

view full answer...

Answer 10

The Buyers Products LED Work Light part #3371492196 has a 6,000K color temperature which produces a cool white light.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Is the Ultra Bright LED Flood Light Vibration Resistant

Product Page this Question was Asked From

Continue Researching