Recommendation for a 6k Disc Brake Trailer Actuator with Electric Reverse Lockout

Question:

Spec says 3x4 channel - Im assuming it will bolt to a 3 x 3 x .25 thicker wall than std without a problem - correct? Is this product suitable for a tandem axle trailer w 4 disk brakes? Anywhere I can view a installation manual prior to purchase? Not much info/feedback on this product. Is there another low profile unit with electric lockout that I should consider?

asked by: Drew

Expert Reply:

Take a look at Dexter actuator # 099-175-20. It couples to either a 1-7/8", 2", or 50mm ball, has a 7,000 pound capacity, and fits a 3 inch wide tongue. It also features an electric lock out.

As long as the trailer is not rated higher than 7,000 pounds, this actuator will work with 4 disc brake assemblies.

expert reply by: Michael H