Bearing Kit for 3,500 lb Axle on Sure-Trac Trailer
Question:
3500 lb axle suretrac 5 bolt 2018 year bearing kit? What bearing kit would I need do I need to know the spindle number and if so where do I Find that?
asked by: Terry
Expert Reply:
I was able to do some digging and found out that Sure-Trac trailers use either a Dexter or Lippert axle, and both of these 3,500 lb axles use the same bearings and grease seal, so we have exactly what you need.
The Bearing Kit for #84 Spindle # BK2-100 is precisely the correct kit for one of the hubs on your trailer, so if you are looking to replace the bearings on both hubs, you'll need a pair of kits. This kit comes with the following:
- Inner Bearing # L68149, Inner Race # L68111
- Outer Bearing # L44649, Outer Race # L44610
- Grease Seal # 58846
I've added links to a video review and a couple help articles for you to check out as well.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Suspension Enhancement
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Shop: Hellwig Pro Series Helper Springs - Above Axle
- Shop: SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Shop: SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Article: How to Measure for Trailer Hitch Drop
- Shop: RV Roof Membrane
- Article: Most Popular Wheel Bearings
- Video: Cleaning and Replacing Hubs and Bearings
- Search Results: bearing dust cover
- Search Results: l44649
- Search Results: dexter 8 259
- Q&A: Possible Solution for Replacing Trailer Bearing L44543
- Q&A: Can 12V Auxiliary Wire on Trailer 7-Way Be Used To Power Trailer Brakes
- Search Results: trailer wiring
- Search Results: lc178278
- Video: Review of Curt Trailer Hitch Ball Mount - Fixed Ball Mount - C84WR
- Video: Curt RockerBall Shock Absorbing Hitch Ball Review
- Search Results: lc53ed
- Search Results: rv toilet seat
- Q&A: Testing Wires of Lippert Ground Control to Determine If Issue is With Controller or Touch Pad
- Q&A: Recommended RV Entry Door Gas Strut For A Thor Class C Motorhome
- Q&A: Replacement for SCS/Frigette Coach Step Controller Part 202-3230
- Q&A: Replacement Control Module for Coach Step 725-0042
- Video: Lippert Components RV and Camper Steps LC301702 Review
- Q&A: Replacement Lippert 4 Point Control Panel for 2007 Damon Outlaw Motorhome
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub