Will Curt Lunette Ring C48560 Fit TorkLift Magnum Pintle Hook Mounting Plate # TLM9002
Question:
Will this pintle ring, fit this mounting plate? Magnum Pintle Hook Mounting Plate Adapter for TorkLift Adjustable Shank - 20,000 lbs Item # TLM9002
asked by: James R
Expert Reply:
I do have a great option for you, however the Curt Lunette Ring # C48560 that you referenced will not work with the TorkLift Magnum Pintle Hook Mounting Plate Adapter # TLM9002. I went out to our warehouse and measured a bolt pattern on the Magnum Mounting Plate of 3-3/8" horizontally (center to center) and 1-1/2" vertically (center to center).
The Curt Lunette Ring features bolt hole spacing of 4-1/2", both horizontally and vertically.
The Magnum Pintle Hook Mounting Plate # TLM9002 features the standard 4-hole spacing for a pintle hook like the excellent Curt # C48215. It isn't designed for mounting a lunette ring, since the hook would typically be on the tow vehicle end (which is what the Magnum Mounting Plate would be hooked up to) while the lunette ring would be on the trailer side.
Because of this we don't have a lunette ring that is compatible with its bolt pattern. If you can tell me a bit more about what you are trying to do, and what your truck is already equipped with, I will be happy to make some additional recommendations.
Products Referenced in This Question
Curt Pintle Hook - Bolt On - 30,000 lbs
- Pintle Hitch
- Pintle Hook - Standard
- 30000 lbs GTW
- Bumper Mount
- Plate Mount
- No Shank
- CURT
more information >
Magnum Pintle Hook Mounting Plate Adapter for TorkLift Adjustable Shank - 20,000 lbs
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Adapters
- Pintle Adapter
- TorkLift
more information >
Product Page this Question was Asked From
Curt Lunette Ring - Flat Plate Mount - 3" Diameter - 60,000 lbs
- Lunette Ring
- Standard Coupler
- Coupler Only
- Bolt-On
- 60000 lbs GTW
- 3 Inch Lunette Ring
- CURT
more information >
Continue Researching
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Bolt Pattern of Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring # 337BDB1385
- Q&A: Weld-On Straight Tongue Coupler for 3 Inch Tongue Rated for at Least 12,000 Pounds
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Charge a Trailer Battery Through a 7-Way Connector
- Q&A: Proper Front to Back Placement of Motorcycle Inside Enclosed Trailer
- Q&A: How Far Forward Should Motorcycle Wheel Chocks Be Installed in a Utility Trailer
- Q&A: Mounting Hole Diameter and Spacing of Pintle Eye T1613700
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: How to Measure a Trailer Axle
- Article: Pintle-Hitches