Swagman XP Hitch Mounted Bike Rack Replacement Locking Knob

Question

Question:

What the screw measurements? I am looking for an M12 1.5 screw size.

asked by: Heidi

0

Expert Reply:

The Swagman XP Hitch Mounted Bike Rack Replacement Locking Knob, item # P1040, will only work with Swagman XP bike racks. As long as your bike rack is a Swagman XP this knob will fit. If the bike rack is some other brand of rack, then I cannot guarantee the knob will fit correctly.

expert reply by: Andi

0

Answer 1

The Curt Trailer Hitch Receiver #13530 is a 2 inch receiver opening and based on your photo the Rack Attack bike carrier is a really old style that is no longer made and we don't carry any adaptors for. My recommendation is to use a similar…

view full answer...

Answer 2

I called our representative at Swagman and the best way to remove your locking knob #P1040, without your key, is to use a pair of needle nose plyers. On the backside of the locking knob attach the plyers around the threaded portion and twist it…

view full answer...

Answer 3

I found your order and since you bought the Swagman XP in 2015 you'd have a newer version like what the part #P1040 fits.

view full answer...

Answer 4

I checked and the Swagman locks are fits for different applications, so the Replacement Locking Knob for Swagman Original and XP Series Bike Carriers - 2009 and Newer #P1040 is not a replacement or interchangeable with the Replacement Locking Knob…

view full answer...

Answer 5

To repair your Swagman Original 3, part #S64152-2, you'll need a top plate, part #P120. This will provide the mounting point to maintain your bikes on the rack. Additionally, you'll want a locking knob, part #P1040 to replace the lost…

view full answer...

Answer 6

Using this lock #P1040 on the Swagman XC2 Bike rack, part #S64650, will not secure the bikes. It would only secure the wheel mounts to the rack. If you are wanting to prevent the bikes from theft with that particular bike rack, use a cable lock like…

view full answer...

Answer 7

The Replacement Locking Knob for Swagman Original and XP Series Bike Carriers part #P1040 is designed for an M10-1.50" bolt.

view full answer...

Answer 8

To get the Locking Knob, #P1040 to lock, once you have it tightened down properly on the cradle, insert the key and turn the key clockwise. Remove the key. The know will now spin, but you will not be able to tighten or loosen it again until it is…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

Hello Jody, There is indeed a bike rack capable of carrying a pair of ebikes and a pair of road bikes at the same time, so long as you have a 2 inch hitch. That said, it really depends on how much your ebikes weigh, but a good option to start with is…

view full answer...

Answer 12

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Swagman XP Hitch Mounted Bike Rack Replacement Locking Knob

Product Page this Question was Asked From

Continue Researching