Parts Needed To Add a 7-Way For a Brake Controller To a 1989 Ford F-350
Question:
I’m needing a complete hardwire trailer brake 7 way kit for a 89 f350 and I am having trouble finding the complete kit. Any help would be greatly appreciated
asked by: Tyler P
Expert Reply:
In order to add a 7-way trailer connector to a 1989 Ford F-350 you will need to combine a few parts as they do not make one complete kit for this vehicle. However, all that will be needed is the Hopkins Plug-In Simple Vehicle Wiring Harness part # HM40125 and then the Universal Installation Kit for Trailer Brake Controller part # ETBC7. The Hopkins Plug-In Simple Vehicle Wiring Harness provides a 4-way and will plug into a port behind the rear bumper and then the Universal Installation Kit for Trailer Brake Controller will plug into this providing the rest of the circuits needed for a 7-way. The black wire will be run to the battery, the blue into the cab, the white to a ground, and then the yellow wire is tied off.
If you also need a brake controller, the Tekonsha Primus IQ Trailer Brake Controller part # TK90160 would be a good choice. The Universal Installation Kit for Trailer Brake Controller comes with everything needed to install the Tekonsha Primus IQ Trailer Brake Controller. I know you are looking for an all-in-one kit but that is just simply not available for this vehicle which is why you will need to combine the below:
Hopkins Plug-In Simple Vehicle Wiring Harness part # HM40125
Universal Installation Kit for Trailer Brake Controller part # ETBC7
Tekonsha Primus IQ Trailer Brake Controller part # TK90160 (If Needed)
![Conner L](https://images.etrailer.com/static/images/catg/people/1234_tn.jpg)
Products Referenced in This Question
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Compatibility of Hopkins Endurance 5th Wheel Harness HM41158 with OEM Wiring Connectors
- Q&A: Will Hopkins Endurance 5th Wheel/Gooseneck Wiring Harness HM41158 Fit 2003 Ford F-250 Super Duty
- Q&A: Adding 7-Way Trailer Connector to 1997 Winnebago Built on a Ford E-350 Van Chassis
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Class V Trailer Hitch that Fits 1995 Ford F-350 Dually
- Q&A: Fit of Curt Class V Receiver Part # C15300 on 1992 Ford F250 with 10 Inch Drop Aftermarket Bumper
- Article: My Trailer Hitch Doesn't Fit
- Q&A: When in Everyday Mode Why Does Hopkins Rear View Camera # HM60195VA Only Come On When in Reverse
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Mount a Truck Bed Camper
- Article: Types of Bumpers