Trailer Hitch and Class II Drawbar for a 1995 Mercury Cougar Come with Hardware
Question:
The hitch you are looking at for your 1995 Mercury Cougar, the Class II Frame Trailer Hitch Receiver Hitch, item # 36179, includes all necessary installation hardware as shown in the instructions (see link). The Class II Drawbar 3-1/8 inch Rise Kit, item # 36061, does come with the pin and clip. Most trailer couplers sit at 17 inches from the ground, so we have specifically matched this draw bar with this rise to your vehicle to accomplish the height you will need. Some items you may need to complete your towing setup are listed below. Hitch Ball # 19256 or # 19258 Trailer Wiring # 119147KIT Hitch Lock # e98882 Pin and Clip # PC3
asked by: Tom
Expert Reply:
The hitch you are looking at for your 1995 Mercury Cougar, the Class II Frame Trailer Hitch Receiver Hitch, item # 36179, includes all necessary installation hardware as shown in the instructions (see link).
The Class II Drawbar 3-1/8 inch Rise Kit, item # 36061, does come with the pin and clip. Most trailer couplers sit at 17 inches from the ground, so we have specifically matched this draw bar with this rise to your vehicle to accomplish the height you will need.
Some items you may need to complete your towing setup are listed below.
Hitch Ball # 19256 or # 19258
Trailer Wiring # C59496
Hitch Lock # e98882
Pin and Clip # PC3
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >