Classic Accessories Deluxe Pop Up Camper Cover Recommendation for a Coleman Cheyenne

Question

Question:

My Coleman Cheyenne measures 10 foot for the main box but adds on 2 feet for the front storage bin. Do I need a 10 to 12 foot cover or one size up? I want to cover the storage bin of course but dont want a lot of extra fabric.

asked by: John

0

Expert Reply:

The Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover # CA80039 that you referenced is designed to work on pop up campers that measure from 10-12 feet in length. And since your camper is 10 feet in length plus another 2 feet for the storage bin this cover should work very well for you with minimal excess fabric.

I attached installation instructions for this product for you to check out also.

expert reply by: Jameson C

0

Answer 1

The Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover, #CA80039, is our best selling popup/folding camper cover. As long as your camper is configured similar to one of the pictured in the drawing I provided, see link, and the body…

view full answer...

Answer 2

The Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover - 10' - 12' Long Item #CA80039 is 85 inches wide. Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover - 12' - 14' Long Item #CA80040 is a bit…

view full answer...

Answer 3

After checking with the manufacturer the Classic Accessories Deluxe Poly Pro III #CA80039 is intended for use while the trailer is in storage. The manufacturer further explained that this is not recommended for use while towing. The manufacturers…

view full answer...

Answer 4

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 5

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 8

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 9

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 10

Yes, the Extang E-Series Tonneau part #EX27UV does fit trucks that have spray-in bed liners and bed rail covers. The cover brackets can clamp to your bed rails without requiring trimming the cover as well.

view full answer...

Answer 11

To get power to the controller of your Solera Smart Arm 12V Power RV Awning part #LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part #SWC9538, and part…

view full answer...

Answer 12

Yes, the Adco Olefin HD travel trailer cover part #AD97ZR does for sure fit your 2015 Jayco X20E. We have confirmed this with Adco.

view full answer...

Classic Accessories Deluxe Pop Up Camper Cover Recommendation for a Coleman Cheyenne

Product Page this Question was Asked From

Continue Researching