Cutting Edge Replacement For 96 Wide Boss Snowplow

Question:

can you confirm the bolt spacing. The chart is a little hard to follow. the one I am replacing has the first bolt at 2 inches from the outside the second bolt is at 6 inches from the outside and the 3rd is at 18inch from the outside. I will attach a picture. I cannot find any manufacturers names.

asked by: Charles H

Expert Reply:

I appreciate you sending in the photo! That definitely helps; and I can definitely see how this can be confusing to read so I went ahead and reached out to our contact at Buyers Products for some clarification on how these schematics read. For reference, it doesn't appear that the 2X signifies anything really, and the 2nd measurement next to the H is going to be the H1 measurement.

I was able to determine that the replacement cutting edge you need for your snowplow with the following measurements: 2" from the edge to the 1st bolt, 4" from the 1st bolt to the 2nd bolt, 12" from the 2nd bolt to the 3rd- is going to be the Replacement Cutting Edge for Boss Snowplows # 3371304752 . This cutting edge works with the measurements shown on the first 3 bolts in your picture.

expert reply by: Erik B