Hub/Drums and Brake Assembly Recommendation for Trailer with 3,500 lb Dexter Axles
Question:
I am trying to determine the appropriate drum and electric brake assembly for 6x12 tandem utility trailer that does not currently have brakes. 15 inch tires and looks like a 5x 4.5 lug pattern. I have attached the axle data in photo. In particular, I am unsure if the drum dimensions needed. Thanx,
asked by: Steve W
Helpful Expert Reply:
Thanks for all of the info and pictures! It makes picking out what you need to add brakes to your trailer for easy.
So the brake assembly part # AKEBRK-35L that you referenced is the correct left hand assembly that will fit the brake flange you have in the picture you submitted. That said, the part # AKEBRK-35L-SA is a self-adjusting version which would be what I would recommend since you'd never have to worry about tightening trailer brakes. For the right side you'd then want the # AKEBRK-35R-SA.
Then for a hub/drum that's the correct size, capacity, and bolt pattern the part # AKHD-545-35-K is your best choice. It even comes pre-greased which saves you a lot of time and mess!
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings
- Q&A: Grease Seal that Fits Hub/Drum KA90831
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Can the 7-Way Plug On the Electric Jack w/ Footplate EJ-3527-BBX Be Removed
- Q&A: Similar Tire Size Replacement for 7.50x16 That Is Radial Construction
- Article: Trailer Maintenance Schedule
- Q&A: Which Replacement Electric Brakes For 10" Drum Stamped KA90831
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Q&A: Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?