Will a Trailer hitch Fit a 2007 Toyota Yaris S Sedan with Aero Package
Question:
I have the 2007 Sedan S spoiler, aero kit around the car. Will this hitch still fit under the bumper/aero kit?
asked by: Brad
Expert Reply:
I reviewed some images of the 2007 Toyota Yaris S Sedan with Aero package. It looks like that package adds several inches to the factory fascia all around the car. Because of this, you will most likely need to trim the area on the added fascia where the hitch receiver will be for any of the available hitches including # 24819. There is no hitch specifically for models with the Aero package.
I have included a link to the installation instructions for you to view. I have also included a link to a video showing a typical installation.
If you plan on doing some towing, the hitch comes with the correct ball mount, hitch pin and clip. For a 1-7/8 inch diameter ball, use # 19256 and for a 2 inch use # 19258. For trailer wiring, use # 119178KIT. I have included a link to the installation instructions for the wiring as well.
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: How to Reset Zero Point Calibration on Lippert Ground Control 3.0
- Q&A: LCI Leveling System Troubleshooting
- Q&A: Replacement Multi-Function LED Trailer Light for Glo-Brite 9852-88
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Front Door Lock Assembly Replacement for Keystone Montana 5th Wheel
- Article: Trailer Maintenance Schedule
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Roof Rack Information
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit