Best Parts Needed to Convert 2014 Montana Fifth Wheel to Electric Over Hydraulic Disk Brakes
Question:
I want to add disk brakes on my 2014 Montana 5th wheel. I believe i have 8000 lbs axles. the questions is are they electric only or electric/Hydraulic. what more info will you need to give me the part# and cost? CVW 15700 Thanks
asked by: Bob C
Expert Reply:
Disc brakes have to have a hydraulic element to activate them which means there isn't strictly an electric only option. What you'll want is an electric over hydraulic setup which gives you the adjustability of electric brakes but also the stopping power of hydraulic disc.
Since we know you have 8,000 lb axles I don't really have any additional questions so what you'll want is the kit part # K2HR858DD if your current wheel studs are 5/8 inch or part # K2HR89DD if they are 9/16 inch and you'll have a great disc brake setup that is Dacromet coated which does an excellent job fighting corrosion.
Then for an actuator kit that comes with the lines you'll need plus the best actuator the HydraStar kit part # HBA16-252-82 would be your best option. The Hydrastar actuators are widely considered to be the most reliable and fastest reacting so they are what we recommend the highest.
I also attached a help article that will walk you through entire process of adding EOH brakes to a trailer as well.
Products Referenced in This Question
Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter
- Shop: Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Article: How to Measure a Trailer Axle
- Search Results: brake line kit
- Search Results: lug nut
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Brass Flares - 1/8" ID - 19'
- Shop: Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Shop: Grease Seals 10-36 (pair)
- Shop: Hydrastar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi
- Shop: Hydrastar Hydraulic Brake Line Kit - Triple Axle - 25' Long, 3/16" Main Line
- Search Results: dexter disk brakes
- Video: Review of Dexter Axle Trailer Brakes - Electric Drum Brakes - DX25QR
- Search Results: flexible hydraulic brake lines
- Search Results: brake line fittings
- Search Results: dexter brake line kits
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Video: Kodiak Disc Brake Kit Review K2R1058D11
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Brake Controller
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement