Correct Draw Bar for Curt Class I Receiver C45025 on 2012 VW Golf TDI
Question:
I just purchased the Curt C11000 for my 2012 VW Golf TDI. That hitch comes with a draw bar. Not sure what the rise is on that draw bar, but would I need to go with a higher rise to level out the trailer? Im still waiting on the hitch and wiring kit to get here in the next day or two, but I just wanted to make sure I have the right equipment so Im not scrambling for parts when I purchase the utility trailer I want.
asked by: Josh
Expert Reply:
The draw bar included with the hitch is part # C45016, which has a 2-5/8 inch rise, or 3-1/4 inch drop.
Ideally, you want to tow the trailer so that it is as level as possible, but being within an inch and a half either way is close enough for government work. Keep in mind that hitch is designed to work best with a draw bar with the same drop as the C45016, and using a draw bar with a different rise or drop is not recommended.
I will link you to our FAQ article that shows how to correctly measure for the needed draw bar.
Products Referenced in This Question
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- CURT
more information >
Continue Researching
- Shop: Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: TowSmart Trailer Coupler Lock Kit Review
- Shop: Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs
- Search Results: max coupler
- Search Results: raised receiver adapter
- Search Results: skid plate
- Video: MaxxTow Hitch Receiver Lock Review
- Video: CR Brophy Hitch Extender Review
- Video: Buyers Products Adjustable Trailer Coupler - Coupler with Bracket - 3370091545 Review
- Video: Review of Demco Adjustable Trailer Coupler - DM13867-52
- Video: Brophy Hitch Adapters - Hitch Extender - HES6 Review
- Q&A: Can The Lock N Roll Vehicle Side Hitch # 336VS503 Fit a Curt Adjustable Ball Mount # C45900?
- Shop: Curt RockerBall Shock Absorbing 2" Hitch Ball - 3/4" Diameter Shank - Chrome - 3.5K
- Shop: Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
- Search Results: trailer lock keyed alike
- Search Results: trailer lock
- Search Results: trailer coupler locks
- Search Results: 8 inch rise hitch
- Q&A: Parts Needed For Towing Trailer With 2" Receiver Style Coupler and Off-Road Hitch With 2" Hitch Ball
- Video: Curt Class II Euro Style Drawbar Review C45591
- Q&A: How to Increase Height of Trailer Hitch Ball to Allow Boat Trailer to be Towed Level
- Q&A: What All Do I Need To Use The Lock and Roll Hitch System?
- Shop: Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
- Shop: Buyers Products Coupler w/ 5-Position Adjustable Channel - Weld-On - 2" Ball - 10,000 lbs
- Shop: Lock N Roll 3-Position Adjustable Channel Bracket for 2" Hitch Receivers - 11,000 lbs
- Shop: Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long
- Q&A: Hitch to Ground Clearance on 2010 VW Golf 2-door 2.5L non-TDI with Curt Trailer Hitch, part # C11000
- Q&A: Can I Upgrade My Trailer Wheels From 8 Inch To 12 Inch?
- Q&A: Difference in Class I and Class II Ball Mounts and Can They Interchange