Trailer Hitch Recommendation for a 2012 Lincoln MKT
Question:
I looked up the hitches you sell for my 2012 Lincoln MKT. I know the MKT is based on the Ford Flex chassis and indeed the Ford Flex is what is shown in the installation video for this hitch. My question concerns whether this is the right hitch. The Flex has dual exhausts routed to the left side of the vehicle while the MKT has dual exhausts one left and one right. Which hitch do I need. I prefer one that is hidden as much as possible and is bolt on. This will be used for nothing heavier than a small utility trailer or boat trailer well under the GVW limits of the car.
asked by: Steve K
Expert Reply:
The Draw-Tite trailer hitch # 75679, will indeed fit the 2012 Lincoln MKT. The fact that the vehicle has left and right side dual exhaust is covered in the instructions which I have linked for you to view. The hitch cross tubing and receiver will be visible below the rear fascia of the vehicle once installed. I have also included a link to a video that shows a typical installation for you.
I also recommend the etrailer ball mount kit, # 989900, which comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring, use # C56095. I have included a link to the installation instructions for the wiring as well.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch Recommendation for 2016 Ford Flex with Dual Exhaust
- Q&A: Recommended Trailer Hitch for a 2016 Lincoln MKT
- Q&A: Recommended Trailer Hitch for 2013 Ford Flex Limited with Dual Exhaust
- Q&A: Trailer Hitch Recommendation for 2018 Ford Flex
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Why Would Trailer Hitch Install Hardware Seem Too Large to Fit Vehicle
- Article: Determining Trailer Tongue Weight
- Q&A: Do Install Bolts for Curt Hitch of 2016 Ford Flex Use Factory Weldnuts
- Q&A: Recommended Parts Needed to Tow with a 2019 Ford Flex
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Performance Chips and Modules
- Article: Trailer Wiring Diagrams