4-Way Wiring Configuration for Demco Trailer Connector Adapter # DM9523069

Question

Question:

The instruction sheet shows the 4 way wiring for a 6 pole and indicates that the wiring for the 4 pole is on the next page but there is NO next page. Could not find wiring instructions for thes cord on your web site.

asked by: Jeff S

0

Expert Reply:

I am sorry for the confusion regarding the 4-Pole wiring on the Demco Trailer Connector Adapter # DM9523069. I went out to our warehouse to try and look through the manual that comes included and the 4-Pole wiring configuration was listed on the backside of the first (and only) page.

On the socket end of the 4-Pole round connector the upper left pin is for yellow/left turn and brake, the upper right pin is for green/right turn and brake, the lower left pin is for white/ground, and the lower right pin is for brown/running lights. I have attached a short video review that you can check out as well.

expert reply by: Chris R

0

Answer 1

The Fogatti RV Tankless Water Heater - Gas - Automatic Pilot - 41,800 Btu - Black Item #LSB44FR requires a cold water inlet pressure of 14.5~116PSI to properly operate. If your tank with ShurFlow water pump can support this you'll have no issues.…

view full answer...

Answer 2

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 3

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.

view full answer...

Answer 6

Yes, there is. The Roadmaster Direct-Connect Base Plate Kit item #RM97RR will work with the Demco Excali-bar if you use the Demco Tow Bar Adapter Kit for Roadmaster Direct-Connect Base Plates item #DM9523032.

view full answer...

Answer 7

Yes, the etrailer Invisible Base Plate Kit #e86YR is a compatible fit for a 2016 Ford F-150 and the Demco Excali-Bar III Non-Binding Tow Bar #DM9511013 without requiring any adapters.

view full answer...

Answer 8

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 9

So based on my research, the Call of Duty MW3 Edition bumper debuted with the 2012 model year, which is why there is no mention of fits for any base plates on a 2011 Jeep Wrangler with that bumper. Since the Jeeps are otherwise the same, it seems…

view full answer...

Answer 10

I have the perfect solution for you! The Patriot Hitches Adjustable Drop Hitch #PH67SR will be exactly what you need. This will fit your 2" receiver and can be adjusted to rise or drop 2-1/2" up to 11". This is going to be your best…

view full answer...