Trailer Wiring, Hitch and Ballmount For 2015 Toyota RAV4
Question:
What about the Installation of the required wiring and plug in socket for the trailer lights? To go with your Curt Trailer hitch for a 2015 Rav4 Limited? Product? Number? Cost? Difficulty of Installation? Thank You.
asked by: Craig D
Helpful Expert Reply:
The Curt Class III receiver hitch part # C13149 for the 2015 Rav4 requires a simple installation that does not require drilling. It does require a small amount of panel trimming for install. I have attached an installation video for your reference.
The trailer wiring I recommend is T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118578 because the Tekonsha brand converter box are reliable and known to last. The wiring harness plugs into your vehicle's wiring harness located inside the trunk behind the tail lights. It is a pretty simple install, I have attached an installation video for you. The prices of these products are on the product pages if you follow the linked part numbers.
f you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If you are not sure what size ball or ball mount rise/drop you need this kit has your bases covered. I have attached a helpful article that explains how to measure for rise or drop.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 2017 Toyota RAV4 Trailer Hitch and Wiring Recommendations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Hitch and Wiring Harness for a 2017 Toyota Highlander
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Q&A: Trailer Hitch Recommendation for 2017 Toyota RAV4 Hybrid
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: What is Required for Trimming the Panel on my 2018 Toyota Rav4 to Fit the Curt Hitch
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Best Available Hidden Hitch for 2017 Toyota RAV4
- Article: Most Popular Wheel Bearings
- Article: How to Choose a Bike Rack That Will Clear a Rear Mounted Spare Tire or Bumper