Recommended Weight Distribution for 2,500 lb Dry Trailer for Hauling Cars
Question:
Hello, Looking for some help with a weight distribution system. The weight of the empty trailer is 2,500lbs. I will be towing small English sports cars that weigh in between 1,200 - 2,000 lbs. Will be towing with a 2019 Toyota Tacoma. Any suggestions on what system to go with? Any help would be greatly appreciated!
asked by: Stuart B
Expert Reply:
When looking into purchasing a Weight Distribution (WD) system you want to find one with a Tongue Weight (TW) range that the Total Tongue Weight (TTW) of your towing setup falls in the middle of. To find the TTW of your towing setup you will need to add the TW of your fully loaded and ready-to-go trailer, which you can use part # e99044 for, along with the weight of any cargo behind the rear axle of your tow vehicle. Keep in mind that a properly loaded trailer will have a TW that is 10-15% of the loaded weight of your trailer.
If you don't put anything behind the rear axle of your 2019 Toyota Tacoma then I recommend the Reese Strait-Line # RP66083 because it has a TW range of 400 lbs - 800 lbs which covers most of your TW range from 250 lbs - 675 lbs (15% TW at the 4,500 lbs of car and trailer) and it utilizes one of the best sway controls on the market as it corrects sway before it starts. To complete this setup you need a 2" # A-90 or 2-5/16" # 19286 hitch ball.
Attached are some review videos and helpful articles that you can check out.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Article: Determining Trailer Tongue Weight
- Q&A: Comparing Weight Distribution Systems that Use Chains Versus No Chains
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Does Torklift 36 inch Hitch Extension for Ford 3 inch Hitch Have Capacity for 6,700 lb Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Capacity of the TorkLift Cannon Hitch Extension for a 3" Ford Super Duty Factory Hitch?
- Q&A: Weight Distribution Recommendation for 2021 Jayco SLX 8 224 BH
- Q&A: Solution for Yakima Holdup Bike Rack that Has Broken Hold Down Arms
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler