Can Step Be Added to TorkLift GlowStep Stow N' Go Scissor Steps

Question

Question:

Can you add 1 step to the Torklift 3 step rv step system? How much would the extra step cost? Thanks

asked by: Randy L

1

Helpful Expert Reply:

Yes, you can add a single step to the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7833 you referenced with the part # TLA7801. This will bolt right onto the existing steps with the included hardware and it features the same glow tape as the original assembly to provide a lighted surface.

Pricing information will be listed on the product page.

expert reply by: Chris R

1

Answer 1

You are correct the Single Add-On Step for TorkLift GlowStep Kits #TLA7801 is the correct part to add a step to the TorkLift GlowStep #TLA7844 that you also mentioned.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The Draw-Tite item #DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item #C29VV. This…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

We haven't had the opportunity to install the Curt Trailer Hitch Receiver #C29VV on a 2023 Lexus RX 350 as of yet (December 2023), but I'm attaching a clip from the instructions for you to reference. This part of the instructions shows there…

view full answer...

Answer 6

Hey Raul, so with the Curt hitch part #C29VV installed on your 2023 Lexus RX350 the hands-free liftgate would still be functional but you'd just need to kick to either side of the hitch opening.

view full answer...

Answer 7

That is great information and I appreciate you letting us know. I will say that we have not got our hands on a 2023 RX 350 model yet, so we have not been able to confirm if the hitch #DT73QR will be compatible with the lift gate sensor. In some…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #C29VV will not interfere with the kick sensor function on your 2024 Lexus RX 350h. To get it to work however, you'll have to kick to either side of the receiver instead of swiping your foot under the bumper for…

view full answer...

Answer 9

Great question! The All Terrain Landing Gear for RV Scissor Steps, #TLA8000, work with most factory scissor steps. Many steps like Brophy Scissor Steps #AS23 use rivets. You are correct - the rivets will need to be drilled out using a 1/4" drill…

view full answer...

Can Step Be Added to TorkLift GlowStep Stow N' Go Scissor Steps

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching